Unit 3: Electricity
grade 10 physics · unit 3
3.1 Simple Electric Circuits
Simple electric circuits: open, closed, and short circuits with a battery, switch, and bulbs; brightness in series and parallel connected bulbs; complete tasks by touching the switches
Open Simulation
3.2 Electric Current
Electric current: charge flow and I = q/t; same current at every point in a series circuit, sum of branch currents equal to the main branch current in a parallel circuit; measure with ammeters
Open Simulation
3.3 Ohm's Law
Ohm's law experiment: change the voltage across a resistor and bulb with an adjustable power supply, measure with an ammeter and voltmeter, plot the V–I graph; slope = resistance; non-ohmic behavior of the bulb
Open Simulation
3.4 Connection of Resistors
Connection of resistors experiment: measure with a voltmeter and ammeter in series and parallel connected resistors; voltages add up in series circuits, currents add up in parallel circuits; equivalent resistance calculation and mixed circuit
Open Simulation
3.5 Connection of Generators
Connection of generators: connect batteries in series, parallel, and reverse; compare bulb brightness, main branch current, and battery depletion time
Open Simulation
3.6 Precautions Against the Dangers of Electric Current
Dangers of electric current: add a device to a house circuit with a 16 A fuse (P = V·I), see the fuse blow under overload; effects of current on the human body and safety rules
Open Simulation
3.7 Importance of Grounding
Grounding: compare the current passing through a person touching the body of a washing machine with compromised insulation in grounded and ungrounded conditions; residual current device cutting off the circuit at 30 mA
Open Simulation