Inclined plane, wheel and axle, and compound machines: move the box to the same height using ramps of different lengths, observe that the force decreases as the ramp gets longer; pull a bucket from a well by changing the arm radius of the wheel and axle; match the components of a compound machine
Return to simulation
Discover how simple machines make our lives easier with the inclined plane and wheel and axle simulation. In this interactive experiment, you can observe mechanical advantage by lifting boxes to the same height with different ramp lengths, pull a bucket by changing the wheel and axle handle radius, and match the components.## What can you do in this simulation?- You can carry boxes to the same height by trying different ramp lengths.- You can see how the required force decreases as the ramp gets longer.- You can experience pulling a bucket from a well by changing the wheel and axle handle radius.- You can match components such as levers, wheel and axles, inclined planes, and wedges with the correct boxes.- You can examine simple machine principles in everyday tools such as bicycle pedals or meat grinders.## Basic concepts and formulasSimple machines do not save work, but they make work easier by providing mechanical advantage. Under ideal conditions on an inclined plane, according to the principle of work, the formula F · L = G · h applies (where F is the applied force, L is the ramp length, G is the load, and h is the height). As the ramp length (L) increases, the force (F) required to lift the load decreases. In wheel and axle systems, mechanical advantage is achieved using torque balance.## How to use it?1. Go to the experiment panel, open the inclined plane tab, and select different ramp lengths.2. Move the box up the ramp and observe the relationship between the ramp length and the required force.3. Switch to the wheel and axle tab, change the handle radius, and test the mechanical advantage.4. In the compound machine matching section, place the cards into the relevant boxes by tapping or dragging and dropping.5. Follow the guide steps, check your predictions, and evaluate the results.## Frequently asked questions### Why is less force needed as the ramp gets longer?According to the law of conservation of work, the work done does not change; as the ramp gets longer, the distance over which the force is applied increases, allowing you to reach the same height with a smaller force.### In which areas are wheel and axle systems used?Buckets used to draw water from wells, bicycle pedals, meat grinders, and screwdrivers are everyday tools that work on the wheel and axle principle.### Do simple machines save work?No, no simple machine saves work or energy. They only make work easier by providing mechanical advantage or by changing the direction of the force.