Chapter 36: Image Formation
University Physics IV: Light and Optics · Chapter 36
36.1 Plane Mirror: Image Location, Full-Length Mirror, Angled Mirrors
Trace the rays emerging from the candle, reflecting off the mirror, and reaching your eye; locate the virtual image by parallax by placing a pin where their extensions intersect. Discover the shortest mirror needed to see your full height and the number of images formed by two inclined mirrors.
Open Simulation36.2 Spherical Mirror: Capturing Image on Screen
Place an illuminated arrow in front of a concave mirror on an optical bench, and find the sharpest image by sliding the screen in a setup where reflected rays are traced with true spherical reflection. Calculate the unknown mirror's focal length from p and q measurements, test magnification, and examine the virtual image in a convex mirror.
Open Simulation36.3 Image by Refraction: Apparent Depth and Glass Rod
Trace the rays leaving a coin at the bottom of a water-filled container, refracting at the surface, and reaching your eye; mark the apparent depth where their extensions intersect and find the refractive index of the liquid. Look for the focal point of rays in a glass rod with a spherical end, and test the spherical refracting surface equation.
Open Simulation36.4 Thin Lens: Focal Length Measurement on an Optical Bench
Place an illuminated arrow, lens, and screen on the optical bench; rays are traced through Snell's law refraction at the lens's two spherical surfaces. Find the sharp image on the screen, measure (p, q), and calculate the unknown lens's focal length from the 1/q–1/p plot; test the magnification, the minimum distance of 4f, and Bessel's method.
Open Simulation36.5 Lens Aberrations: Spherical and Chromatic Aberration
Pass parallel rays through a plano-convex lens: measure how rays passing near the edge cross the axis closer, discovering that aberration grows with h² and changes when the lens is flipped. Compare the foci of red and blue light, and design an achromatic doublet by adding a second lens made of flint glass.
Open Simulation36.6 Camera: Focusing, Aperture, and Exposure
Focus on a person by shifting the 50 mm lens relative to the sensor; in a camera where rays are traced using the thin-lens rule, measure the circle of confusion, the effect of the f-number on exposure and depth of field, and calculate the image size on the sensor.
Open Simulation36.7 The Eye: Accommodation, Near and Far Points, Eyeglass Prescription
In the reduced eye model (a single thin lens + retina at 1,70 cm), move an object closer and farther to measure the near and far points of normal, myopic, hyperopic, and presbyopic eyes; track the blur on the retina to find the correct contact lens power (diopters) for each eye.
Open Simulation36.8 Magnifying Glass: Measuring Angular Magnification
Place small text at and inside the focal point of a magnifying glass; measure angular magnification by comparing the angular size subtended at the eye to that seen when the text is at 25 cm. Discover that m = 25/f when the image is at infinity, and m = 1 + 25/f at the near point.
Open Simulation36.9 Compound Microscope: Intermediate Image and Total Magnification
Trace the rays between the objective and the eyepiece; shift the specimen with fine focus to bring the intermediate image to the eyepiece's focus and collimate the exiting rays. Calculate the total magnification from the objective's lateral magnification and the eyepiece's angular magnification, and compare by changing objectives.
Open Simulation36.10 Telescope: Keplerian and Galilean Telescopes
Pass an inclined parallel light beam from a distant star through the objective and eyepiece; shift the eyepiece to make the exiting rays parallel (afocal setup), measure the exit angle, and find that the angular magnification is −f_o/f_e. Observe that the image is erect in a Galilean telescope with a diverging eyepiece.
Open Simulation